ASTM F436 covers hardened steel washers for bolts from 1/4 to 4 in. nominal diameter. They are through hardened so they do not dish or gall under a high strength bolt at full tension. Type 1 is carbon steel. Type 3 is weathering steel.

F436 washers from Eastwood

  • Hardened washers to F436, including clipped, beveled and extra thick styles made to your drawing
  • Heat treatment done in house or by outside heat treaters, to the grade's requirements
  • Material certifications with heat numbers shipped with the order
  • PPAP documentation at Levels 1 to 5, for a fee
  • An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
Request a quote

Types

TypeMaterialMarking
1Carbon steelF436 and the maker's mark
3Weathering steel, for atmospheric corrosion resistanceF436, 3 and the maker's mark

Specify Type 1 or Type 3 on the order. Where corrosion resistance matters, specify Type 3.

Styles

StyleSizes (in.)Use
Circular1/4 to 4Standard flat washer
Beveled1/2 to 1-1/2Square beveled washer for the sloped flange of American standard beams and channels
Clipped1/4 to 4 circular; 1/2 to 1-1/2 beveledOne side cut off for tight edge clearance
Extra thick1/2 to 45/16 in. nominal thickness, for oversized holes in structural joints

Hardness

FinishHardness (HRC)
Plain, through hardened38 to 45
Hot-dip galvanized26 to 45

The lower galvanized limit allows for the heat of the zinc bath.

Where F436 washers are used

F436 is the usual hardened washer for structural bolts to F3125 Grades A325 and A490, and for A449, A354 and Grade 8 bolts. Use it under the turned element, nut or head, where a hardened washer is called for. For low strength A307 bolts, a plain F844 washer is normally used instead.

F436 or F844

F436F844
HardnessThrough hardened, 38 to 45 HRC plainNot hardened
Used withHigh strength bolts: F3125 A325 and A490, A449, A354, Grade 8Low strength bolts such as A307
Sizes1/4 to 4 in.General use sizes

Common questions

What is an F436 washer?

A through hardened steel washer for bolts from 1/4 to 4 in., used mainly with high strength structural bolts.

What is the difference between F436 Type 1 and Type 3?

Type 1 is carbon steel. Type 3 is weathering steel for atmospheric corrosion resistance and is marked with a 3.

How hard is an F436 washer?

38 to 45 HRC plain, and 26 to 45 HRC when hot-dip galvanized.

Are F436 washers the same as SAE washers?

No. They follow a similar round pattern, but F436 washers are hardened and held to their own thickness and hardness limits.

When do I need an extra thick F436 washer?

For structural joints with oversized holes, where the 5/16 in. extra thick style covers the hole.

What is ASTM F436 material?

Type 1 is carbon steel and Type 3 is weathering steel, through hardened to 38 to 45 HRC (26 to 45 HRC when hot-dip galvanized).

Is F436 equivalent to grade 8?

Washers are not graded like bolts. F436 is the hardened washer normally used with high strength bolts such as Grade 8, A490 and A354 BD.

Sizes Eastwood makes

We make F436 washers from 1/4 to 4 in., including clipped, beveled and extra thick styles and special ODs to your drawing.

Washers · Specialty nuts · Custom bolts · Industrial studs · Quality, certifications and PPAP

Quote F436 washers

Send the bolt size, style, type, finish and quantity, or send the print. Add any coating, testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.

Request a quote sales@emfasteners.com

The tables summarize requirements from ASTM F436. The standard itself governs. Check the current edition for your order.