ASTM A307 covers carbon steel bolts, studs and threaded rod from 1/4 to 4 in. diameter at 60 ksi minimum tensile. Grade A is for general use. Grade B is for flanged joints in piping systems with cast iron flanges. It is the everyday, non-heat-treated bolt grade.

A307 parts from Eastwood

  • Bolts, studs, bent bolts and threaded rod to A307, made to your drawing
  • Material certifications with heat numbers shipped with the order
  • PPAP documentation at Levels 1 to 5, for a fee
  • An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
Request a quote

Grades

GradeTypical use
AGeneral-purpose bolts, studs, threaded rod and bent bolts
BHeavy hex bolts and studs for flanged piping joints with cast iron flanges
CReplaced by ASTM F1554 Grade 36 in 2007

Strength and hardness

GradeSize (in.)Tensile (ksi)Elongation, min (%)Hardness
A1/4 to 460 min18121 to 241 HBW
B1/4 to 460 to 10018121 to 212 HBW

Grade B has a maximum tensile strength as well as a minimum, so the bolt yields before a cast iron flange cracks. The 121 HBW minimum applies to bolts shorter than three times their diameter; longer bolts have a maximum only.

Chemistry

Element, max (%)Grade AGrade B
Carbon0.290.29
Manganese1.201.20
Phosphorus0.040.04
Sulfur0.150.05

Nuts and washers

BoltSize (in.)Usual nut
Grade A1/4 to 1-1/2A563 Grade A hex
Grade AOver 1-1/2 to 4A563 Grade A heavy hex
Grade B1/4 to 4A563 Grade A heavy hex

F844 flat washers are the usual washer for Grade A. See ASTM A563 nuts.

Strength compared

A307 Grade AA307 Grade A: 60 ksi minimum tensile60SAE J429 Grade 5 (to 1 in.)SAE J429 Grade 5 (to 1 in.): 120 ksi minimum tensile120A449 (to 1 in.)A449 (to 1 in.): 120 ksi minimum tensile120A193 B7 (to 2-1/2 in.)A193 B7 (to 2-1/2 in.): 125 ksi minimum tensile125A354 BC (to 2-1/2 in.)A354 BC (to 2-1/2 in.): 125 ksi minimum tensile125SAE J429 Grade 8SAE J429 Grade 8: 150 ksi minimum tensile150A354 BDA354 BD: 150 ksi minimum tensile150A490A490: 150 ksi minimum tensile150A574 (to 1/2 in.)A574 (to 1/2 in.): 180 ksi minimum tensile180
A307 is the lowest-strength common bolt grade, about half the tensile strength of a Grade 5 bolt. Minimum tensile strength in ksi.

Grade C

A307 Grade C covered nonheaded anchor bolts. It was removed in 2007 and replaced by ASTM F1554 Grade 36. Drawings that still call for A307 Grade C are usually supplied to F1554 Grade 36.

A307 compared

SpecificationTypical partMinimum tensile (ksi)Heat treatedSize range (in.)
A307 Grade ABolts, studs, threaded rod60No1/4 to 4
SAE J429 Grade 5Bolts, screws, studs120 to 1 in.; 105 aboveYesUp to 1-1/2
A449Bolts, studs, any shape120 to 1 in.; 105; 90 above 1-1/2Yes1/4 to 3
F3125 Grade A325Heavy hex structural bolts120Yes1/2 to 1-1/2
SAE J429 Grade 8Bolts, screws, studs150YesUp to 1-1/2
A354 Grade BDBolts, studs150Yes1/4 to 4
F3125 Grade A490Heavy hex structural bolts150 (173 max)Yes1/2 to 1-1/2
A574Socket head cap screws180 to 1/2 in.; 170 aboveYes#0 to 4

Common questions

What is ASTM A307?

The standard for carbon steel bolts, studs and threaded rod from 1/4 to 4 in. at 60 ksi minimum tensile. Grade A is general purpose; Grade B is for flanged piping joints with cast iron flanges.

What is the difference between A307 Grade A and Grade B?

Grade B has a 100 ksi maximum tensile strength and a lower hardness limit, so it yields before a cast iron flange cracks. Its sulfur limit is also lower.

Is A307 the same as Grade 2?

They are close in strength. SAE J429 Grades 1 and 2 are the usual equivalents of A307 for sizes up to 1-1/2 in.

What nut goes with an A307 bolt?

An A563 Grade A nut: hex up to 1-1/2 in., heavy hex above. Grade B bolts take A563 Grade A heavy hex nuts.

What replaced A307 Grade C?

ASTM F1554 Grade 36, since 2007.

What is the ASTM A307 equivalent to?

SAE J429 Grades 1 and 2 in strength, up to 1-1/2 in. In metric, property class 4.6 is the usual equivalent.

Is A307 the same as grade 36?

Not quite. A307 Grade A is a 60 ksi bolt standard. Grade 36 usually means ASTM F1554 Grade 36 anchor rods, 36 ksi yield and 58 to 80 ksi tensile, which replaced A307 Grade C.

What is the difference between A307 and A325 bolts?

A325 (now F3125 Grade A325) is a quenched and tempered structural bolt at 120 ksi. A307 is a carbon steel bolt at 60 ksi, not heat treated. They are not interchangeable in a structural connection.

Sizes Eastwood makes

We machine bolts and studs from bar up to 3.000 in. diameter, with small diameters on our Swiss machines. Headed parts are smaller, because the head sets the bar size. Larger parts are quoted too.

Industrial studs · Custom bolts · Hex head cap screws · Water systems · Quality, certifications and PPAP

Quote A307 parts

Send the grade, diameter, length, thread, finish and quantity, or send the print. Add any coating, testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.

Request a quote sales@emfasteners.com

The tables summarize requirements from ASTM A307. The standard itself governs. Check the current edition for your order.