
ASTM A325 Structural Bolts
A325 is the 120 ksi heavy hex structural bolt, 1/2 to 1-1/2 in. diameter, made from heat treated steel. ASTM withdrew A325 as its own standard in 2016. It is now Grade A325 of ASTM F3125, which also covers A490 and the twist-off F1852 and F2280 bolts.
A325 bolts from Eastwood
- Heavy hex structural bolts to F3125 Grade A325, including lengths and thread lengths that are not stocked, made to your drawing
- Heat treatment done in house or by outside heat treaters, to the grade's requirements
- Material certifications with heat numbers shipped with the order
- PPAP documentation at Levels 1 to 5, for a fee
- An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
A325 is now F3125
| Former standard | Now | Minimum tensile | Head |
|---|---|---|---|
| A325 | F3125 Grade A325 | 120 ksi | Heavy hex |
| A490 | F3125 Grade A490 | 150 ksi | Heavy hex |
| F1852 | F3125 Grade F1852 | 120 ksi | Twist-off |
| F2280 | F3125 Grade F2280 | 150 ksi | Twist-off |
Orders and drawings still say A325, and the bolt head is still marked A325 with the maker's mark.
Strength
| Property | F3125 Grade A325 |
|---|---|
| Size | 1/2 to 1-1/2 in. |
| Tensile, min | 120 ksi |
| Yield, min | 92 ksi |
| Elongation, min | 14% |
| Reduction of area, min | 35% |
Under the old A325 standard, bolts over 1 in. had lower minimums (105 ksi tensile, 81 ksi yield). Under F3125 the larger sizes carry the same requirements as 1 in. and under.
Type 1 and Type 3
| Type | Material | Typical use |
|---|---|---|
| 1 | Medium carbon, carbon boron, alloy or alloy boron steel | Painted, plain or galvanized steelwork |
| 3 | Weathering steel | Exposed weathering steel left unpainted |
Type 2 was withdrawn in 1991. Old callouts such as A325T (fully threaded, length up to 4 times the diameter) and A325M (metric) still appear on drawings.
Connection types
| Code | Meaning |
|---|---|
| SC | Slip critical: the joint holds by friction between the plates |
| N | Bearing type, threads included in the shear plane |
| X | Bearing type, threads excluded from the shear plane |
The connection type comes from the engineer's design. It decides the thread length and the bolt length we make.
Chemistry
| Element (Type 1, heat analysis) | % |
|---|---|
| Carbon | 0.30 to 0.52 |
| Manganese | 0.60 min |
| Phosphorus | 0.035 max |
| Sulfur | 0.040 max |
| Silicon | 0.15 to 0.30 |
| Boron | 0.003 max |
Type 3 weathering steel adds copper, nickel and chromium, either to a set composition or to a corrosion index.
Nuts and washers
| Component | Type 1 bolt | Type 3 bolt |
|---|---|---|
| Nut | A563 Grade DH heavy hex, or A194 Grade 2H. F3125 also allows other A563 grades on plain bolts; galvanized bolts take DH. | A563 Grade DH3 heavy hex (C3 is also allowed on plain bolts) |
| Washer | F436 Type 1 | F436 Type 3 |
Galvanizing and coatings
| Coating | Standard | Grade A325 | Grade A490 |
|---|---|---|---|
| Hot-dip galvanizing | ASTM F2329 | Permitted | Not permitted |
| Mechanical galvanizing | ASTM B695 Class 55 | Permitted | Not permitted |
| Zinc-flake coatings | ASTM F3393 | Permitted | Only the coatings F3125 lists |
Galvanized nuts are tapped oversize after coating to fit over the zinc. Order galvanized bolts, nuts and washers together so the nut overtap matches the coating.
A325 compared
| Specification | Typical part | Minimum tensile (ksi) | Heat treated | Size range (in.) |
|---|---|---|---|---|
| A307 Grade A | Bolts, studs, threaded rod | 60 | No | 1/4 to 4 |
| SAE J429 Grade 5 | Bolts, screws, studs | 120 to 1 in.; 105 above | Yes | Up to 1-1/2 |
| A449 | Bolts, studs, any shape | 120 to 1 in.; 105; 90 above 1-1/2 | Yes | 1/4 to 3 |
| F3125 Grade A325 | Heavy hex structural bolts | 120 | Yes | 1/2 to 1-1/2 |
| SAE J429 Grade 8 | Bolts, screws, studs | 150 | Yes | Up to 1-1/2 |
| A354 Grade BD | Bolts, studs | 150 | Yes | 1/4 to 4 |
| F3125 Grade A490 | Heavy hex structural bolts | 150 (173 max) | Yes | 1/2 to 1-1/2 |
| A574 | Socket head cap screws | 180 to 1/2 in.; 170 above | Yes | #0 to 4 |
Metric equivalent
The metric grade is F3125 Grade A325M, 830 MPa minimum tensile.
| Inch grade | Closest metric class | Metric minimum tensile |
|---|---|---|
| SAE J429 Grade 5, A449 and F3125 A325 | 8.8 | 800 MPa to M16, 830 MPa above (about 116 to 120 ksi) |
| SAE J429 Grade 8, A354 BD and F3125 A490 | 10.9 | 1,040 MPa (about 151 ksi) |
| A574 socket head cap screws | 12.9 | 1,220 MPa (about 177 ksi) |
The pairs are close in strength, not interchangeable. Metric and inch threads do not mix, and the standards test and mark differently. Grade 5 and A449 match class 8.8 only up to 1 in.; above that they fall below it.
Common questions
What is ASTM A325?
A heavy hex structural bolt, 1/2 to 1-1/2 in., of heat treated steel at 120 ksi minimum tensile, used to connect structural steel. Since 2016 it is Grade A325 of ASTM F3125.
What replaced the ASTM A325?
ASTM F3125, in 2016. A325 is now a grade within F3125, alongside A490 and the twist-off F1852 and F2280 bolts. Drawings and bolt heads still say A325.
Is A325 the same as grade 8?
No. A325 is 120 ksi minimum tensile, the same level as SAE J429 Grade 5. Grade 8 matches A490 at 150 ksi.
What is the ASTM A325 bolt equivalent?
In strength, SAE J429 Grade 5 and A449 up to 1 in. In metric, F3125 Grade A325M at 830 MPa, close to property class 8.8. None is a drop-in substitute in a structural joint without engineering approval.
Can A325 bolts be galvanized?
Yes. Hot-dip galvanizing to ASTM F2329 and mechanical galvanizing to B695 Class 55 are permitted, with A563 DH nuts tapped oversize to suit. A490 bolts may not be galvanized this way.
What is the difference between A325 and A490 bolts?
A325 is 120 ksi minimum tensile and can be galvanized. A490 is 150 ksi, alloy steel, and may not be hot-dip or mechanically galvanized. They are not interchangeable without engineering approval.
Sizes Eastwood makes
F3125 Grade A325 covers 1/2 to 1-1/2 in. heavy hex bolts. We make them to your length and thread length, plain or galvanized, along with matching DH nuts and F436 washers.
Related pages
Hex head cap screws · Custom bolts · Specialty nuts · Washers · Quality, certifications and PPAP
Industries that use this spec: Power Generation
Other specification guides: ASTM F1554 anchor rods · ASTM A490 structural bolts · ASTM A193 · A193 Grade B7 · ASTM A194 nuts · ASTM A320 · ASTM A453 Grade 660 · ASTM A354 · ASTM F593 and F594 · SAE J429 Grades 5 and 8 · ASTM A574 socket head cap screws · ASTM A307 · ASTM A449 · ASTM A563 nuts · ASTM F436 washers
Quote A325 bolts
Send the diameter, length, type, finish and quantity, or send the print. Add any coating, testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.
Request a quote sales@emfasteners.com
The tables summarize requirements from ASTM F3125 Grade A325. The standard itself governs. Check the current edition for your order.