ASTM A563 covers carbon and alloy steel nuts for general structural and mechanical use on bolts, studs and other externally threaded parts, from 1/4 to 4 in. The grade sets the proof load the nut must carry without stripping. Heavy hex is the default when the order does not name a style, except Grade A from 1/4 to 1-1/2 in. Grades A and B are also made as hex nuts.

A563 nuts from Eastwood

  • Hex and heavy hex nuts to A563, including sizes and threads that are hard to find in stock
  • Heat treatment done in house or by outside heat treaters, to the grade's requirements
  • Material certifications with heat numbers shipped with the order
  • PPAP documentation at Levels 1 to 5, for a fee
  • An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
Request a quote

Grades

GradeMaterial and treatmentStyle
ACarbon steelHex or heavy hex
BCarbon steelHex or heavy hex
CCarbon steel, may be quenched and temperedHeavy hex
C3Weathering steelHeavy hex
DCarbon steel, may be quenched and temperedHeavy hex
DHCarbon steel, quenched and temperedHeavy hex
DH3Weathering steel, quenched and temperedHeavy hex

Proof load and hardness

GradeStyleSize (in.)Proof load stress, plain (ksi)Proof load stress, galvanized (ksi)Hardness, Rockwell
AHex1/4 to 1-1/29068B68 to C32
AHeavy hex1/4 to 410075B68 to C32
BHex1/4 to 112090B69 to C32
BHexOver 1 to 1-1/210579B69 to C32
BHeavy hex1/4 to 1133100B69 to C32
BHeavy hexOver 1 to 1-1/211687B69 to C32
C and C3Heavy hex1/4 to 4144144B78 to C38
DHeavy hex1/4 to 4150150B84 to C38
DH and DH3Heavy hex1/4 to 4175150C24 to C38

Values are for coarse thread (UNC, 8UN and coarser). Proof load in pounds is the proof load stress times the tensile stress area of the thread.

Galvanized nuts

Hot-dip galvanized nuts are tapped oversize after coating so they fit a galvanized bolt. That oversize tapping is why galvanized proof load values are lower for most grades. A galvanized nut is not a substitute for a plain nut on a plain bolt, or the other way around.

Which nut for which bolt

BoltUsual A563 nut
A307 Grade AGrade A hex to 1-1/2 in., heavy hex above
A449, plainGrade B hex to 1-1/2 in., Grade A heavy hex above
A449, galvanizedGrade DH heavy hex
F3125 Grade A325Grade DH heavy hex
F3125 Grade A490Grade DH heavy hex, or DH3 for weathering steel
SAE J429 Grade 8SAE J995 Grade 8, or A563 Grade DH heavy hex

A nut of a higher grade than listed is normally acceptable. The bolt standard governs the match.

A563 or A194

A563 nuts are for general and structural service. ASTM A194 nuts are for high pressure or high temperature service. An A194 Grade 2H heavy hex nut is accepted in place of an A563 Grade DH nut on Type 1 (non-weathering) structural bolts. Type 3 bolts take DH3. The reverse is not true: an A563 nut is not a substitute in A194 service.

Markings

GradeMarking
A and BNot required unless the purchaser asks; when marked, the grade letter
CC and the maker’s mark
C3C3 and the maker’s mark
DD and the maker’s mark
DHDH and the maker’s mark
DH3DH3 and the maker’s mark

Grade O has been discontinued.

Common questions

What is an ASTM A563 nut?

A carbon or alloy steel nut for general structural and mechanical use, 1/4 to 4 in. The grade sets its proof load.

What is the difference between A563 Grade A and Grade DH?

Grade A is plain carbon steel at 90 to 100 ksi proof load stress. Grade DH is quenched and tempered at 175 ksi plain, for high strength bolts such as A490.

Can A194 2H nuts replace A563 DH nuts?

Yes, on Type 1 (non-weathering) structural bolts, A194 2H heavy hex nuts are an accepted alternative to A563 DH. Type 3 bolts take DH3.

Why is the galvanized proof load lower?

Galvanized nuts are tapped oversize to fit over the zinc on the bolt, which reduces the thread engagement.

What style is an A563 nut by default?

Heavy hex when the order does not name a style, except Grade A from 1/4 to 1-1/2 in. Grades A and B are also made as hex nuts.

What material is ASTM A563?

Carbon steel for most grades, with alloy steel permitted in some; C3 and DH3 are weathering steel. Grades C, C3 and D may be quenched and tempered; DH and DH3 must be.

Is heavy hex nut plain A194 similar to A563?

An A194 Grade 2H heavy hex nut is accepted in place of an A563 DH nut on Type 1 structural bolts. A194 nuts are made for high temperature and pressure service; A563 nuts are not a substitute there.

Sizes Eastwood makes

We machine hex and heavy hex nuts from 1/4 to 4 in., including special threads, thick nuts and materials beyond A563.

Specialty nuts · Hex head cap screws · Industrial studs · Custom bolts · Quality, certifications and PPAP

Quote A563 nuts

Send the grade, size, thread, style, finish and quantity, or send the print. Add any coating, testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.

Request a quote sales@emfasteners.com

The tables summarize requirements from ASTM A563. The standard itself governs. Check the current edition for your order.