ASTM F1554 covers steel anchor bolts, also called anchor rods, that are cast into concrete to hold down columns, poles and equipment. There are three grades: 36, 55 and 105, named for their minimum yield strength in ksi. Rods are straight, bent or headed, and the top end is painted to show the grade.

F1554 anchor rods from Eastwood

  • Anchor rods to F1554 Grade 36, 55 and 105: straight, bent or headed, made to your drawing
  • Heat treatment done in house or by outside heat treaters, to the grade's requirements
  • Material certifications with heat numbers shipped with the order
  • PPAP documentation at Levels 1 to 5, for a fee
  • An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
Request a quote

Grades and strength

GradeMinimum yield (ksi)Tensile (ksi)End color
363658 to 80Blue
555575 to 95Yellow
105105125 to 150Red
Grade 36yield 36, tensile 58 to 80 ksiGrade 55yield 55, tensile 75 to 95 ksiGrade 105yield 105, tensile 125 to 150 ksi050100150ksi
Light bar: minimum yield. Solid bar: the tensile range, minimum to maximum. The same figures are in the table above.

Color codes

The top end of each rod, the end that sticks out of the concrete, is painted blue for Grade 36, yellow for Grade 55 and red for Grade 105. The color lets an inspector check the grade after the rods are set. When the grade is stamped on the end instead (Supplement S3), paint is not required.

Anchor rod styles

StraightBent (L or J)Headeddashed line: top of concrete
Common F1554 anchor rod styles. The painted top end shows the grade: blue 36, yellow 55, red 105.
StyleHow it holds in concrete
Straight, threaded both endsA nut, or a nut and plate, on the embedded end
Bent (L or J)The hook resists pull-out
HeadedA forged or welded head on the embedded end

The style, length, thread length and projection come from the engineer's drawing. We make each to that drawing.

Welding

GradeWelding
36Weldable. A weldable Grade 55 may be supplied in its place at the supplier’s option.
55Weldable when ordered with Supplement S1. Without S1, weldability is not assured.
105Not for welding

Nuts and washers

GradeUsual nutWasher
36A563 Grade A: hex to 1-1/2 in., heavy hex aboveF436
55A563 Grade A: hex to 1-1/2 in. plain, heavy hex if galvanized or above 1-1/2 in.F436
105A563 Grade DH heavy hex, or A194 2H by substitutionF436

Heavy hex nuts are commonly specified on all grades. A higher grade nut is acceptable.

Galvanizing

All three grades can be hot-dip galvanized (ASTM F2329) or mechanically galvanized (ASTM B695 Class 55). Hot-dip is the most common finish for exposed anchor rods. Tell us the finish when you ask for a price, because galvanized rods need nuts tapped oversize to fit over the zinc.

F1554 and A307 Grade C

Anchor bolts used to be ordered to A307 Grade C. That grade was removed in 2007 and replaced by F1554 Grade 36. Drawings that still call for A307 Grade C are normally supplied to F1554 Grade 36.

Common questions

What does ASTM F1554 mean?

ASTM F1554 is the standard for steel anchor bolts (anchor rods) cast into concrete to hold down columns, light poles, equipment and other structures. It has three strength grades: 36, 55 and 105.

What is the difference between F1554 and A36?

A36 is a structural steel plate and shape specification. F1554 Grade 36 is an anchor rod standard with a 36 ksi minimum yield, the same as A36 steel, plus a 58 to 80 ksi tensile range and its own testing, marking and thread rules.

What material is equivalent to ASTM F1554 grade 36?

F1554 Grade 36 rods are commonly made from A36 or equivalent bar. It replaced A307 Grade C, the old anchor bolt grade, in 2007. A weldable Grade 55 may be supplied in place of Grade 36 at the supplier’s option.

Is F1554 grade 55 galvanized?

It can be. Grade 55 is commonly hot-dip galvanized. Nuts for galvanized rods are tapped oversize to fit over the zinc.

Can F1554 anchor rods be welded?

Grade 36 is weldable. Grade 55 is weldable when ordered with Supplement S1. Grade 105 is not intended for welding.

What color is F1554 grade 105?

Red. Grade 36 is blue and Grade 55 is yellow, painted on the top end of the rod unless the grade is stamped.

Sizes Eastwood makes

F1554 covers anchor rods from 1/2 to 4 in. diameter in Grades 36 and 55, and 1/2 to 3 in. in Grade 105. We make straight, bent and headed rods to your length, thread length and projection, plain or galvanized, with matching nuts and washers.

Industrial studs · Custom bolts · Specialty nuts · Washers · Quality, certifications and PPAP

Quote F1554 anchor rods

Send the grade, diameter, length, style (straight, bent or headed), thread length, finish and quantity, or send the drawing. Add any testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.

Request a quote sales@emfasteners.com

The tables summarize requirements from ASTM F1554. The standard itself governs. Check the current edition for your order.