ASTM A574 covers quenched and tempered alloy steel socket head cap screws from #0 (0.060 in.) to 4 in. diameter. They are among the highest-strength standard inch fasteners, at 180 ksi minimum tensile up to 1/2 in. Dimensions follow ASME B18.3, and the standard finish is black oxide.

Socket head cap screws from Eastwood

  • Socket head cap screws to A574, and special lengths, threads and materials made to your drawing
  • Heat treatment done in house or by outside heat treaters, to the grade's requirements
  • Material certifications with heat numbers shipped with the order
  • PPAP documentation at Levels 1 to 5, for a fee
  • An AS9100D and ISO 9001:2015 certified shop in Houston, Texas
Request a quote

What A574 covers

ItemASTM A574
ProductHexagon socket head cap screws
Size range#0 (0.060 in.) to 4 in.
MaterialAlloy steel made to fine grain practice, quenched and tempered
DimensionsASME B18.3
Standard finishBlack oxide, unless another finish is specified
Metric versionASTM A574M was withdrawn in 2015; metric parts are usually ordered to ISO 4762

Strength and hardness

Property0.500 in. and underOver 0.500 in.
Tensile, full size, min (ksi)180170
Proof load stress (ksi)140135
Hardness (HRC)39 to 4537 to 45

For 1 in. and larger, machined test specimens must also show 153 ksi minimum yield, 170 ksi tensile, 10% elongation and 35% reduction of area.

Strength by size

ksiA574 minimum tensile and proof12013014015016017018019001/21234Diameter, in.Tensile: 180 ksi to 0.500 in., 170 ksi aboveTensileProof stress: 140 ksi to 0.500 in., 135 ksi aboveProof
Strength steps down once, at 1/2 in. Solid line is tensile, dashed line is proof stress.

Material

A574 screws are alloy steel with at least 0.33% carbon, 0.035% phosphorus maximum and 0.040% sulfur maximum. Common steels include 4037, 4137, 4140, 4142, 4340 and 8740. The steel must harden through to the core, which is why larger screws use the higher-alloy grades.

Button head socket cap screws (F835)

ASTM F835 is the companion standard for alloy steel socket button head cap screws (0.060 to 0.625 in.) and socket flat countersunk head cap screws (0.060 to 1-1/2 in.). These head styles are meant for shear-type loads and have lower tensile requirements than A574. See F835 for the values by style and size.

Strength compared

A307 Grade AA307 Grade A: 60 ksi minimum tensile60SAE J429 Grade 5 (to 1 in.)SAE J429 Grade 5 (to 1 in.): 120 ksi minimum tensile120A449 (to 1 in.)A449 (to 1 in.): 120 ksi minimum tensile120A193 B7 (to 2-1/2 in.)A193 B7 (to 2-1/2 in.): 125 ksi minimum tensile125A354 BC (to 2-1/2 in.)A354 BC (to 2-1/2 in.): 125 ksi minimum tensile125SAE J429 Grade 8SAE J429 Grade 8: 150 ksi minimum tensile150A354 BDA354 BD: 150 ksi minimum tensile150A490A490: 150 ksi minimum tensile150A574 (to 1/2 in.)A574 (to 1/2 in.): 180 ksi minimum tensile180
A574 socket head cap screws are among the highest-strength standard inch fastener grades. Minimum tensile strength in ksi.

Metric equivalent

Inch gradeClosest metric classMetric minimum tensile
SAE J429 Grade 5, A449 and F3125 A3258.8800 MPa to M16, 830 MPa above (about 116 to 120 ksi)
SAE J429 Grade 8, A354 BD and F3125 A49010.91,040 MPa (about 151 ksi)
A574 socket head cap screws12.91,220 MPa (about 177 ksi)

The pairs are close in strength, not interchangeable. Metric and inch threads do not mix, and the standards test and mark differently. Grade 5 and A449 match class 8.8 only up to 1 in.; above that they fall below it.

Common questions

What is ASTM A574?

The standard for quenched and tempered alloy steel socket head cap screws, from #0 to 4 in. diameter. Minimum tensile strength is 180 ksi up to 1/2 in. and 170 ksi above.

How hard are A574 socket head cap screws?

39 to 45 HRC for 0.500 in. and smaller, and 37 to 45 HRC for larger sizes.

Are socket head cap screws stronger than Grade 8 bolts?

Yes. A574 screws are 180 ksi minimum tensile up to 1/2 in., against 150 ksi for SAE J429 Grade 8.

What is ASTM F835?

The standard for alloy steel socket button head and flat countersunk head cap screws. They are meant for shear loads and have lower tensile requirements than A574.

What dimensions do A574 screws follow?

ASME B18.3 for head, socket and thread dimensions.

What grade is ASTM A574 equivalent to?

Metric property class 12.9 is the closest, at 1,220 MPa (about 177 ksi). A574 is stronger than SAE J429 Grade 8.

What is ASTM A574 material?

Alloy steel with at least 0.33% carbon, made to fine grain practice and quenched and tempered, for example 4137, 4142, 4340 or 8740.

What is the standard for socket head cap screws?

ASTM A574 for alloy steel, with dimensions from ASME B18.3. ASTM A574M, the metric version, was withdrawn in 2015; metric socket head cap screws are usually ordered to ISO 4762 in property class 12.9. ASTM F835 covers button and flat head socket cap screws.

Sizes Eastwood makes

We machine socket head cap screws to print, including special lengths, threads and materials that are not on a distributor's shelf. Small diameters run on our Swiss machines.

Socket head cap screws · Cap screws · A286 fasteners · Aerospace · Quality, certifications and PPAP

Quote socket head cap screws

Send the thread size, length, head style, material, finish and quantity, or send the print. Add any coating, testing or PPAP requirement and the date you need the parts. Lead time comes back with the price.

Request a quote sales@emfasteners.com

The tables summarize requirements from ASTM A574 and F835. The standard itself governs. Check the current edition for your order.