At a glance

Eastwood Manufacturing makes fasteners and precision turned parts in Houston, Texas. Eleven CNC machines take bar from miniature #1-72 and M1.6 screws up to 3.000 in. diameter, in A286, Inconel, Monel, Hastelloy, titanium, stainless and alloy steel. Passivation is done in house, heat treatment in house or through outside providers, and material certifications ship with the parts. AS9100D and ISO 9001:2015 certified.

Request a Quote

What fits

The quickest answer is the diameter of your part. Six CNC turning centers take bar up to 3.000 in., and three Swiss machines handle small and slender work down to miniature threads. Parts larger than 3.000 in. are made with manufacturing partners and supplied as an Eastwood part.

Bar diameter each machine group takes

Star SR-20RII Swiss0.787 in.
Tsugami B0326-III Swiss1.250 in.
Haas ST-15Y, ST-20Y2.500 in.
Haas ST-30, Okuma LB30003.000 in.
01 in.2 in.3 in.

Smallest threads run on the Swiss machines: #1-72 and M1.6.

Bar sizes are machine capacities, not a promise for every part. Length, material and features all bear on what can be run. Request a quote and we will tell you yes or no.

The machines

Eleven CNC machines, with bar feeders on the turning centers so parts run from bar rather than from cut blanks.

MachineQuantityLargest bar
Tsugami B0326-III Swiss21.250 in.
Star SR-20RII Swiss10.787 in.
Haas ST-15Y turning center22.500 in.
Haas ST-20Y turning center22.500 in.
Haas ST-30 turning center13.000 in.
Okuma LB3000 EX II MYW 80013.000 in.
Haas VF-2 and VF-2SS, four-axis mills2Milled parts and features

The Swiss machines run from 12 ft bar feeders, the larger turning centers from 6 ft feeders. Four of the turning centers have live tooling and a Y axis, so milled features are cut in the same setup as the turning. One setup means one set of datums, and that is how the features stay in position relative to one another. The mills take on drilled heads, slots, flats, cross holes and parts that are not turned.

From quote to shipped part

Every job runs the same way, whether it is five pieces or a production release.

How a job runs 1Your request arrives 2We quote it 3Material bought,certifications collected 4Turning and milling 5Heat treatment, in houseor through a provider 6Passivation in house,ASTM A967 or AMS 2700 7Inspection to your specifications 8Parts ship with certifications

Machining, passivation and heat treatment are handled under one purchase order, so the part arrives finished rather than coming back to you between operations.

Materials we machine

Regular work here, not a wish list. A286 and 17-4 PH in particular run often enough that common hex nuts and cap screws sit on the stock shelf.

Inconel and A286 are run with an operator at the machine. If your part is in an alloy that is not on this list, request a quote anyway and we will tell you whether we run it.

Processes under this roof

  • Turning and milling on the machines above, including live tooling and Y-axis work on four of the turning centers
  • Threading in inch and metric, right- and left-hand, including class 3A and 3B fits when specified
  • Passivation in house, citric acid, to ASTM A967 or AMS 2700
  • Heat treatment in house or through outside providers, to the specified condition
  • Plating, coating and other finishes through qualified outside providers, finished to the specification you call out

Tolerances

Tolerances come from your specifications. The dimensions, tolerances, threads, finish and inspection requirements you specify are what we machine and inspect to. We do not publish a general tolerance table, because the right answer is the one on your part.

Certifications and paperwork

Eastwood Manufacturing is certified to AS9100D and ISO 9001:2015. Material certifications with heat numbers ship with the parts. Stock A286 and 17-4 PH parts are made from domestic, DFARS-compliant material. PPAP packages, Levels 1 to 5, are available for a fee. If your order carries sourcing, certification, testing or inspection requirements, put them on the request and we quote to them.

Common questions

What is the largest part you can machine?

Bar up to 3.000 in. diameter on the CNC turning centers. Parts above that are made with manufacturing partners and supplied as an Eastwood part, on Eastwood paperwork. Request a quote either way.

What is the smallest part you can machine?

The Swiss machines run miniature threads down to #1-72 and M1.6. Small, slender turned parts are what those machines are for.

What tolerances do you hold?

The ones you specify. We machine and inspect to your specifications rather than to a published shop tolerance, and we quote to what they ask for.

Do you passivate and heat treat in house?

Passivation is done in house with citric acid, to ASTM A967 or AMS 2700. Heat treatment is done in house or through outside providers, depending on the material and the condition you specify.

Is Eastwood certified?

Yes. Eastwood Manufacturing holds AS9100D and ISO 9001:2015 certification and works to those systems on every order.

Request a quote and we will tell you yes or no.Request a Quote

Where to go next

What we make: All products · Cap screws · Custom bolts · Studs and threaded rod · Specialty nuts · Pins · Washers · Special and non-standard parts

Free tools: Flange bolt chart · Bolt weight calculator

Also useful: Quality and PPAP · Materials · Specification guides · Industries we serve

Published by Eastwood Manufacturing, an AS9100D and ISO 9001:2015 certified custom fastener manufacturer in Houston, Texas. Company leadership: Robert Dressel, President.