
Bolt Weight Calculator
Estimate the weight of studs, threaded rod or plain bar blanks for freight and material planning. Choose the diameter, length, material and quantity.
Threads are UNC up to 1 in. and 8 threads per inch above 1 in. Threaded weight is figured on the basic pitch diameter. Nuts and washers are not included.
Weight per inch of threaded rod, alloy steel
| Size | Pounds per inch | Pounds per foot |
|---|---|---|
| 1/4-20 | 0.011 | 0.13 |
| 5/16-18 | 0.017 | 0.20 |
| 3/8-16 | 0.025 | 0.30 |
| 7/16-14 | 0.034 | 0.41 |
| 1/2-13 | 0.045 | 0.54 |
| 9/16-12 | 0.058 | 0.69 |
| 5/8-11 | 0.071 | 0.86 |
| 3/4-10 | 0.105 | 1.26 |
| 7/8-9 | 0.144 | 1.73 |
| 1-8 | 0.188 | 2.26 |
| 1-1/8-8 | 0.243 | 2.92 |
| 1-1/4-8 | 0.305 | 3.66 |
| 1-3/8-8 | 0.373 | 4.48 |
| 1-1/2-8 | 0.449 | 5.39 |
| 1-3/4-8 | 0.621 | 7.45 |
| 2-8 | 0.821 | 9.85 |
| 2-1/4-8 | 1.049 | 12.59 |
| 2-1/2-8 | 1.305 | 15.66 |
| 2-3/4-8 | 1.589 | 19.06 |
| 3-8 | 1.900 | 22.80 |
For other materials, multiply by the material density and divide by 0.284.
Material densities used
| Material | Density (lb per cubic inch) | Density (g per cubic cm) |
|---|---|---|
| Alloy or carbon steel (B7, B16, 4140) | 0.284 | 7.86 |
| 304 or 316 stainless | 0.289 | 8.00 |
| 17-4 PH | 0.282 | 7.81 |
| A286 | 0.287 | 7.94 |
| Inconel 718 | 0.297 | 8.22 |
| Monel 400 | 0.319 | 8.83 |
| Hastelloy C-276 | 0.321 | 8.89 |
| MP35N | 0.304 | 8.41 |
| Titanium 6Al-4V | 0.160 | 4.43 |
| Silicon bronze | 0.308 | 8.53 |
Questions buyers ask
How do you calculate the weight of a bolt or stud?
Multiply the volume of the part by the density of the material. For a threaded stud the volume is usually figured on the thread pitch diameter, which accounts for the metal removed by the thread form.
How much does a 5/8 in. B7 stud weigh?
A 5/8-11 B7 stud 3-1/2 in. long weighs about 0.25 lb. A box of 100 weighs about 25 lb before nuts.
Does the weight include nuts and washers?
No. The calculator gives the weight of the stud, rod or bar only. Add the nuts and washers separately.
How accurate is a stud weight estimate?
Close enough for freight and material planning. Actual weight changes with thread class, chamfers, coatings and the material lot, so do not use the figure for invoicing.
Related: Flange bolt chart · Studs and threaded rod · A193 B7 studs · Materials we machine